Product proposal
ACE MicromaticLT-30 1500 M+
CNC SLANT BED LATHE
Supplying Australian manufacturers since 1967
Prepared forQMT Machinery
Thank you for
the opportunity
to quote
The ACE Micromatic LT-30 1500 is a CNC slant bed lathe with 1,500 mm between centres, a 480 mm maximum turning diameter and an 80 mm bore through its A2-8 heavy duty cartridge spindle. It sits on a heavily ribbed, thermally seasoned Grade 25 cast iron box bed, with hardened and ground box ways on both axes. Drive comes from an 18.5 kW continuous Fanuc spindle motor under Fanuc 0i-TF Plus control. Overload trip clutches on X and Z and a programmable tailstock are standard.
- For
- Alistair McDonaldQMT Machinery
- Dated
- 27.10.2026
- Valid until
- 27.11.2026
- Your contact
- Alistair McDonald0408 036 760
Feature highlights
Heavily ribbed bed
Fine grain Grade 25 cast iron box type bed, heavily ribbed and thermally seasoned, with the chip pan under the cutting area.
Precision guideways
Hardened and ground box ways or linear motion roller guideways on both axes, depending on the model, with automatic centralised oil lubrication.
Overload trip clutches
Overload tripping clutches protect the X and Z axes.
Programmable tailstock
A programmable tailstock with an external rotating centre is standard.
Trusted by
Specifications
| CAPACITY | |
|---|---|
| Swing over bed | 650mm |
| Swing over cross slide | 415mm |
| Max. turning diameter | 480mm |
| Max. turning length | 1,500mm |
| Distance between centres | 1,500mm |
| SPINDLE | |
|---|---|
| Spindle nose | A2-8(Opt A2-11 (max 2,000rpm, 105mm bore)) |
| Spindle bore | 80mm |
| Front bearing bore | 120mm |
| Max. bar capacity | 68mm |
| Spindle speed | 50-2,500rpm |
| Spindle motor power | 18.5kW continuous / 22kW 30 min |
| Chuck | 3 jaw hollow power chuck(Opt HS-10 3 jaw hollow power chuck & 1 more) |
| AXES | |
|---|---|
| X axis travel | 255mm |
| Z axis travel | 1,540mm |
| X and Z axes rapid traverse | 15m/min |
| Guideways | Hardened and ground box type guideways on X and Z axes |
| TOOLING | |
|---|---|
| Turret | 8 station bi-directional electromechanical turret (BTP-125)(Opt 12 station BTP-125 turret & 12 station HTP-125 turret) |
| OD turning tool | 25 x 25mm |
| Max. boring bar diameter | 50mm |
| TAILSTOCK | |
|---|---|
| Tailstock | Programmable, external rotating centre, programmable quill |
| Quill diameter | 100mm |
| Quill travel | 120mm |
| Quill taper | MT5 |
| Tailstock base travel | 1245mm |
| CONTROL | |
|---|---|
| Controller | Fanuc 0i-TF Plus |
| Hand wheels | Electronic handwheel (MPG) |
| GENERAL | |
|---|---|
| Coolant tank capacity | 250L |
| Hydraulic pump capacity | 38L/min |
| Hydraulic tank capacity | 70L |
| Floor space (L x W x H) | 4,560 x 1,875 x 1,980mm |
| Net weight | ~7,500kg |
| Power supply | 415V, 50Hz, 3 phase AC |
CNC CONTROLLER / SERIES 0I-F PLUS
Fanuc0i-TFPlus
- 10.4"DISPLAY
- 4MAX AXES SIMULTANEOUS
STANDARD
- Rigid tapping
- Nano interpolation
- Multiple repetitive cycles (G70 to G76)
- Custom macro (Macro B)
- Canned cycles for drilling
- Cs contouring control (C axis)
- Tool life management
- Embedded Ethernet
- Memory card and USB memory input/output
ALSO AVAILABLE
- Manual Guide i
Inclusions
Fanuc 0i-TF Plus control
A2-8 heavy duty cartridge spindle, 80mm bore
Fanuc spindle motor
Fanuc servo drives on both axes
Hardened and ground box guideways on both axes
8 station bi-directional turret (BTP-125)
Programmable tailstock, rotating centre, programmable quill
Drain line oil cooler
Hydraulic system
Coolant system (5 bar)
Automatic centralised lubrication system
Built-in lighting system
Machine manuals (instruction and parts), English
Overload trip clutches on X and Z axes
Air conditioner for the control cabinet
Electronic handwheel (MPG)
Oriented spindle stop (M19)
Laser calibration
Basic safety features- Chuck: HS-10 3 jaw hollow power chuck
Pricing
| Product | Price (ex GST) |
|---|---|
| ACE Micromatic LT-30 1500 | $135,000 |
| Less: 2nd machine discount | -$5,000 |
| Delivery to Taminda, NSW | Included |
- Model number
- LT-30 1500
- Weekly rent
- $1,495+ GST & Damage Waiver
- Minimum term (weeks)
- 26 WeeksMinimum term can be adjusted to reduce weekly rent if required.
Why Rent-2-Own?
- 100% expensable, off your balance sheet
Claim the full weekly rental as an immediate tax deduction.*
- Preserve your capital
A predictable weekly operating cost, not a big Capex hit, so your cash stays free to grow the business.
- Take on new work without the upfront outlay
Add or upgrade to brand new gear that lifts output & expands your capabilities now, all for a fixed weekly rate.
- Not finance. No long lock-in
Short minimum term, then keep renting, pay it out, or hand it back.
- Try before you commit, risk-free
Not sure the machine, brand or solution is right? Prove it on your own floor first. If it doesn’t work out, hand it back. No wasted capital, no asset you’re stuck with.
- You’re not just renting. You’re paying it off.
Half your weekly rent turns into equity and reduces what you pay to own it outright.
Your options at end of term
Purchase
Buy the machine outright for $110,565
Rent
Continue renting & building equity, buy-out anytime.
Return
Return the machine back to us.
*Information provided is general only and not tax, financial or accounting advice. Please consult your accountant regarding your circumstances.
Terms & conditions
TERMS OF PAYMENT
30% deposit on placement of official order and balance before delivery.
LEAD TIME
Approximately 27 to 31 weeks from receipt of official order and deposit.
DELIVERY
Customer is responsible for unloading and locating machine into required installation area.
COMMISSIONING (EXTRA COST OPTION)
Prior to arrival of our technician, the machine must be in its intended location on a stable foundation. All services, such as electrical outlets and air connections must be operable and in correct locations.
QUOTATION VALIDITY
As per quotation validity date.
SPECIFICATIONS
The manufacturer reserves the right to improve/alter the design and specifications.
WARRANTY
In accordance with the manufacturer’s warranty, we agree to replace or repair all parts that prove to be defective in materials or workmanship within twelve (12) months of purchase, provided that the machine has been operated within the manufacturer’s recommendations.
We trust this quotation meets with your approval. Should you require additional information, please do not hesitate to contact us.
